Calculator
Impact Window & Door Cost Calculator
Add up the cost of hurricane impact windows, sliding glass doors and entry doors for a Florida home, including the High-Velocity Hurricane Zone.
Project Costs
How Much Do Impact Windows Cost in Florida? (2026 Prices)
What hurricane impact windows and doors cost in Florida per opening and for a whole house, including sliders, entry doors and Miami-Dade pricing.
The short answer
- A standard-size impact window usually costs about $900–$1,800 installed in Florida. Large, specialty and premium-line windows run about $1,800–$3,800.
- Impact sliding glass doors cost about $2,500–$6,000 for a two-panel door and $5,000–$9,000 for a three-panel door.
- A typical home with 10 standard windows, 2 large windows and one slider lands around $15,000–$31,500.
- Expect higher prices in Miami-Dade and Broward, where products need High-Velocity Hurricane Zone approval.
On this page
Impact windows are the hurricane protection you don't have to think about when a storm is coming: no panels to haul out, no tracks to clear. They're also one of the larger home improvement purchases in Florida, so it pays to understand what drives the price before you collect quotes.
Impact window and door cost per opening
Installers usually quote per opening, with the price depending on size, style, frame material, glass and the brand's product line. The ranges below include removing the old unit, installing the new one and standard finishing around it.
| Item | Estimated range | What affects it |
|---|---|---|
| Standard impact window (single-hung or horizontal roller, up to about 3 × 5 ft) | $900–$1,800per window | Entry-level aluminum and vinyl frames sit at the low end. |
| Large, specialty or premium-line impact window | $1,800–$3,800per window | Picture windows, casements, tall units and premium brands. |
| Impact sliding glass door, 2 panels (about 6–8 ft) | $2,500–$6,000per door | Width, glass options and frame material drive the range. |
| Impact sliding glass door, 3 panels (about 9–12 ft) | $5,000–$9,000per door | Large multi-panel and pocketing systems can cost $15,000–$40,000 or more. |
| Impact front entry door (single) | $2,500–$5,000per door | Double doors, sidelights and decorative glass often run $5,000–$12,000. |
Impact glass is laminated: a tough interlayer holds the glass together if it breaks, so the opening stays closed against wind-borne debris. Florida tests use missiles fired at the glass, and products are approved for specific design pressures. That testing and the heavier frames are why impact units cost much more than ordinary windows. For entry doors in more detail, see hurricane-rated front door costs.
Example budgets
These examples use our impact window calculator.
| Project | What's included | Estimated range |
|---|---|---|
| Condo or small home | 6 standard windows, 1 two-panel slider | $7,900–$17,000 |
| Typical single-family home | 10 standard windows, 2 large windows, 1 two-panel slider | $15,000–$31,500 |
| Same home in Miami-Dade or Broward | Same openings, High-Velocity Hurricane Zone products | $17,000–$35,500 |
| Larger home | 16 standard windows, 4 large windows, 2 three-panel sliders, entry door | $34,000–$67,000 |
Need a contractor for this project?Request an impact window estimate
Try your own numbers
Impact window and door cost calculator
Count the openings you want to replace. Leave the rest at zero.
Estimated range
$15,000 – $31,500
Typical Florida pricing, installed.
- Standard windows (10)
- $9,000–$18,000
- Large or specialty windows (2)
- $3,600–$7,600
- Sliding doors, 2 panels (1)
- $2,500–$6,000
This is a preliminary estimate for budgeting, not a contractor quotation.
Includes removing the old units and standard finishing. Stucco or drywall repair around enlarged openings, custom colors and tinted or low-E glass can add cost. Bedroom windows must still meet emergency escape size rules.
Ready to get started?
Tell us about your project, and we may be able to connect you with a contractor serving your area.
Request an impact window estimateOptional. You don't need to share any details to use the calculator.
What drives the price
- Size and style. Single-hung and horizontal rollers cost least. Casements, picture windows, tall units and arched tops cost more.
- Frame material. Aluminum is common and usually the lowest-cost impact frame. Vinyl costs a bit more and insulates better. Premium lines with thicker frames, special finishes or higher design pressures sit at the top of the range.
- Glass options. Low-E coatings, tint and privacy glass add cost. They also change heat gain, which matters in Florida's sun.
- Where you live. Miami-Dade and Broward are the High-Velocity Hurricane Zone. Products there need approval for that zone, often a Miami-Dade Notice of Acceptance, and one Florida installer puts the premium at around 10–15%. Coastal sites elsewhere may also need higher design pressures. For Melbourne, Palm Bay, Viera and the Brevard beaches, see impact window costs in Brevard County.
- Openings that change size. Making an opening bigger or smaller means cutting or filling concrete block or framing, then patching stucco and drywall. That's structural work and costs extra.
- Second-story access. Upper-floor windows need ladders or lifts and take longer.
Impact windows or shutters?
Shutters cost less upfront, especially storm panels, but someone has to put them up before every storm. Impact windows protect the opening all year with no effort, block noise and can improve security. See impact windows vs. hurricane shutters for a side-by-side comparison, and our hurricane shutter cost guide for shutter prices. Fabric and roll-down screens are another option; see impact windows vs. hurricane screens.
Permits, product approvals and insurance
Window and door replacement generally needs a building permit, and every unit must have a Florida product approval or a Miami-Dade Notice of Acceptance suitable for your home's wind requirements. Your installer lists those numbers on the permit application. Our window and door permit guide and hurricane code and product approval guide explain the details.
After the job, a wind mitigation inspection documents your opening protection, which insurers use to calculate wind discounts. Keep the product approval paperwork and the final permit, because the inspector will ask for proof.
Getting comparable quotes
Ask each installer for an itemized quote that lists, for every opening: the size, the style, the brand and product line, the product approval number, the glass package and the design pressure rating. Also ask:
- Who pulls the permit and records the Notice of Commencement?
- How will they finish the openings: stucco patch, trim, caulk, paint?
- What's the lead time, and when is the deposit due? Our guide to contractor deposits in Florida explains the rules.
- What warranty covers the product, and what covers the installation?
Make sure the installer is licensed for the work, then use our contractor checklist before you sign.
Frequently asked questions
Are impact windows worth it in Florida?
For many homeowners, yes, because they protect openings all the time without anyone having to put up shutters, and they also reduce noise and can improve security. They cost more than most shutters, so compare both for your home. Ask your insurance agent how protected openings affect your premium before deciding.
Do I have to replace all my windows at once?
No. Many homeowners do it in phases. But insurance credits for opening protection generally look at whether all openings are protected, so ask your agent how a partial job would be treated.
How long does it take to get impact windows?
Ordering custom-sized impact units often takes several weeks or more, and the permit adds time. Installation itself is usually a few days for a typical home. Lead times stretch before and after hurricane season, so plan early.
Do impact windows need a permit?
Yes, window and door replacement generally needs a building permit in Florida, and the products must have Florida or Miami-Dade product approval for your area's wind requirements.
Sources and further reading
- Impact Window Costs in Florida (2026 Guide) (Safeguard Impact)
- How Much Do Impact Windows Cost in Florida? (2026 Prices) (Armor Pro Windows)
- Hurricane Impact Sliding Glass Doors: Sizes, Prices & Ratings (Armor Pro Windows)
- Impact Front Doors Prices and Installation Costs (LatestCost)
- Debris impact standards for openings (Florida Division of Emergency Management)
We summarize official information in our own words and link to the source. Requirements can change, so confirm details with the source before relying on them. Our editorial standards
Related guides
Renovation Guides
Impact windows or hurricane shutters?
Impact windows and hurricane shutters compared on cost, protection, insurance credits, salt air and upkeep, plus Space Coast permit and HOA rules.
Project Costs
How much do hurricane shutters cost?
What storm panels, accordion shutters and roll-down shutters cost in Florida per square foot and for a typical home, and how to choose between them.
Permits & Regulations
Do I need a permit to replace windows?
When replacing windows, sliding doors, entry doors and garage doors needs a permit in Florida, product approvals, impact requirements and county differences.
Permits & Regulations
Hurricane codes and product approval
How Florida hurricane rules affect a remodel: the High-Velocity Hurricane Zone, the wind-borne debris region, Miami-Dade NOAs and product approval.
Renovation Guides
Wind mitigation inspections explained
What a Florida wind mitigation inspection checks, which upgrades can earn insurance discounts, who can inspect, and how My Safe Florida Home grants work.
Project Costs
Impact window cost in Brevard County
What impact windows and doors cost for homes in Melbourne, Palm Bay, Viera and the Brevard beaches, with wind zone rules, permits and budget examples.
Project Costs
Impact front door cost
What a hurricane impact front door costs in Florida: single and double doors, materials, glass, outswing vs. inswing, permits and insurance credits.